Focus on Aluminum Fabrication & Solution Providing
Asia Aluminum Group factory is one of the largest manufacturers of extruded aluminum profiles in Asia. Since its establishment in 1991,the Company is dedicated to the design and manufacturing of advanced high precision extruded aluminum profiles.Through years of effort and perseverance, Asia Aluminum's product range has expanded from architectural doors,windows and curtain walls to various industrial profiles, aviation,rail transportation,automotive electronics application, communication technology,IT etc., with its products being used all over the world.
20 years of history, solar system support millions of solar mounting and thousands of tons of aluminum profile of solar mounting become our company's milestones.
Brilliance-Alu company born in 1998, its origins go back to when it was a distributor of aluminum profile in its country, China. A market, which for solar energy to a tremendous growth for the company and then allowed it to position itself as a manufacturer of solar mounting. The favorable policies made of this country a very important market, for the international renewable energy sector, as well as a springboard to forge I Do Solar’s future success.
Throughout all these years I Do Solar has shown solution, quality of service and extensive experience with hundreds of projects in over 10 countries. A job well done which has finally been rewarded with the AAG’s member in 2016.
I Do Solar company, with extensive path and clear international vocation since its inception, is currently on booming, mainly due to the cost reduction. I Do Solar has a global presence from its central offices (Shanghai), factory(Jiangyin City), logistic warehouses, production facilities (China), and partners (in more than 20 countries).
|Tin roof solar mounting solution components list|
|1||Aluminum Rail||Alu6005-T5||Customized||Customized||34mm x 45mm x custom length, used as standard for multiple roof types, used with clamps and brackets Check Manuals for bracket spacing.|
|2||L-Bracket||Alu-6005-T5||Portrait||0.06Kg||Connecting hole, comes with EPDM rubber seal designed for use with various metal roof types. Does not come with Roffing Screw, please select Roofing screw to suit your application.|
|3||Universal Mid-Clamp||Alu-6005-T5||50mm||0.06kg||Specially Designed to fit all module types from 31mm to 50mm modules, uses custom designed spring, loading the clamp while installing the the module for ease of installation.|
|4||Mid-Clamp with Earthing||Alu-6005-T5||50mm||0.06Kg||Designed to fit all module types from 31mm to 50mm modules, uses custom designed spring, Loading the clamp while installing the the module for ease of installation. Comes with built-in Earthing plate.|
|5||Klip-lok Bracket||Alu-6005-T5||50MM||0.4Kg||34mm x 45mm x custom length, used as standard for multiple roof types, used with clamps and brackets Check Manuals for bracket spacing.|
|6||End Clamp||Alu-6005-T5||50mm||0.06Kg||Designed to fit all module types from 31mm to 50mm, Easily change the clamp height within seconds while working on the roof.|
|7||Rail Joiner||Alu-6005-T5||100mm||0.08Kg||Designed to completely cover the back of the rail allowing a super strong bond between the joining rails. This allows zero twist or flex at the joining point. Great for uneven rooftops.|
|8||Earthing Lug 4-6mm Core||Alu-6005-T5||50mm||0.06Kg||Designed to attach earthing wire to the rail via earthing washer, Lug has both 4mm and 6mm port holes to accommodate for both earth wire types|
|9||T-Head Rail Connector with Nut||Steel||30mm||0.03Kg||Designed to connect all Brackets to aluminum rail.Including Tile, L- bracket,Klip-Loc and other Brackets.|
Located in an old military airport, Chelveston is the largest project where Tamesol has participated as a supplier of photovoltaic solar panels. Thousands of TM-Systems panels, TM-P660250, more than 200Ha of land extension where the panels coexist with the wind turbins, converting Chelveston to the largest renewable energy source in the United Kingdom.
In Bangkok, this solar park has 24000 units of IDS-GM-0002, 250W model. Total Installed Power of more than 5MW, in a 10Ha extension. One of the pioneering projects in the country, where I Do Solar has the had the pleasure of participating once again as a supplier of solar mounting bracket.
Packing Details : After routine packaging, plywood is needed to avoid fumigation tray + wrapping film fixation.If the product exceeds the length (more than 2.3 meters), the iron frame + wheel will be loaded into the container.
Delivery Details : Can provide full container and LCL delivery.
For Saving Your Precious Time, We Need To Know These Information First!
1. What are the local wind speed and snow pressure?
2. What is the total power of the project?
How much solar panels are used in this solar energy system?
What’s the size of the solar panel? Length, width and sickness?
Most common size is: 1650×992×35/40/45/50mm
3. For roof mounting:
What kind of roof structure? Tin roof, Tile roof, Flat roof or other roof?
How much roof is the solar system used on?
Each roof’’s size, length and width
4. For ground mounting:
First, we need the soil quality report.
Second, what is the solar system fixed mode? Ground screw, cement block or others.
Third, what is the ground type? Single column, double column, four column and others.
Fourth, what is the maximum distance from the ground?
What is the minimum distance from the ground?
Send us these messages, our professional engineers design projects for you for free.
For more detail information and quotation
please contact us:
Manager: Levi Zhu
Tel/Wechat: +86 15-12-10-58788
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.