AAG
Aluminum tube and square

Lu: xingcai wholesale and processing industrial aluminum framework workbench aluminum aluminum manufacturer

by:AAG     2020-11-15
Aluminum processing, is a complicated process of the consuming energy, its processing is have a lot of problems need to pay attention to in the process of 1. In order to prevent we do most of the processing in the process of mould manufacturing process, suddenly found that the final polishing surface with sand holes or unknown miscellaneous grains, and make workpiece scrapped. Adopting unique grain refining process assurance, aviation products all by aerospace aluminum alloy products of ultrasonic flaw detection process inspection, no sand hole, horizontal grain, air bubble and impurities. Heat treatment technical excellence, product in 300 mm thickness ( Or diameter) The following, strength, hardness can be consistent. All production process computer control, seldom people deviation, different batch production can be guaranteed performance. 2. In the market to buy European board or domestic board within a day or two after processing deformation suddenly. Perfect the pre-tension stress relief process, eliminate stress, products in the processing and mechanical nor warping, cracking and deformation. 3. We are precision workpieces, required thickness and tolerance is very accurate, such as uneven tolerance, self correction not only costs rise, time waste, sometimes make workpiece is invalid. All products conform to the American society for testing material and specification, ASTM) And aerospace material specifications ( AMS) , most of the product tolerance index can be more than 2 ASTM1 / tolerance precision, the partial products tolerance index can be more than even ASTM1/4 standard tolerance precision. 4. All products conform to the American society for testing material and specification, ASTM) And aerospace material specifications ( AMS) , most of the product tolerance index can be more than 2 ASTM1 / tolerance precision, the partial products tolerance index can be more than even ASTM1/4 standard tolerance precision. The chemical composition, strength and hardness to minimize deviation, processing will not occur in 'stick knife', 'collapse' phenomenon. Heat treatment technical excellence, product in 300 mm thickness ( Or diameter) The following, strength, hardness can be consistent. 5. Our products are all made by aluminum alloy, we feel difficult problems in the production process is used to purchase aluminum alloy quality is not stable, can try, when using change again, sometimes the same batch of aluminum quality difference is very big also, the production process is difficult to adapt. Is hard to ensure product quality. In order to prevent this, we all the production process of computer control, seldom people deviation, different batch production can be guaranteed performance. 6. Processing using all through a guide plate bending test, bent 180 degrees won't produce cracking phenomenon. To reach this aluminum demands in bending no cracks. 9. Aluminum coloring effect by the lattice structure arrangement, compact structure and heat treatment technology of three factors is decided. According to the above method processing of aluminium profile must be of high quality, durable.
Custom message
Chat Online
Chat Online
Chat Online inputting...