Focus on Aluminum Fabrication & Solution Providing
Asia Aluminum Group factory is one of the largest manufacturers of extruded aluminum profiles in Asia. Since its establishment in 1991,the Company is dedicated to the design and manufacturing of advanced high precision extruded aluminum profiles.Through years of effort and perseverance, Asia Aluminum's product range has expanded from architectural doors,windows and curtain walls to various industrial profiles, aviation,rail transportation,automotive electronics application, communication technology,IT etc., with its products being used all over the world.
20 years of history, support millions of solar mounting and thousands of tons of aluminum profile of solar mounting become our company's milestones.
Brilliance-Alu company born in 1998, its origins go back to when it was a distributor of aluminum profile in its country, China. A market, which for solar energy to a tremendous growth for the company and then allowed it to position itself as a manufacturer of solar mounting. The favorable policies made of this country a very important market, for the international renewable energy sector, as well as a springboard to forge I Do Solar’s future success.
Throughout all these years I Do Solar has shown solution, quality of service and extensive experience with hundreds of projects in over 10 countries. A job well done which has finally been rewarded with the AAG’s member in 2016.
I Do Solar company, with extensive path and clear international vocation since its inception, is currently on booming, mainly due to the cost reduction. I Do Solar has a global presence from its central offices (Shanghai), factory(Jiangyin City), logistic warehouses, production facilities (China), and partners (in more than 20 countries).
|Ground Solar Mounting Solution Components list|
|1||Steel Tube Leg||Galvanized Steel||3500mm||25Kg/m||700~3700mm x 60mm round galvanised steel pipe it used to connect the front leg to the cross section pipe, used to connect vertically from the T-Piece down to the ground screw or the Bottom cap Piece.|
|2||Brace Arm Piece||Galvanized Steel||2430mm||38.8Kg||40mm x 40mm steel Brace Arm Piece designed for cross bracing the upper frame both north, west and east, west. Join to steel pipe using the 312-0001 Diagonal Brace sleeve.|
|3||Rail to Cross Pipe Conector||Alu-6005-T5||50mm||4.11Kg||Allows the connection of module rail to the steel pipe frame, the part is compatible with various module rails, inluding our aluminum and steel rails. Part includes all fixings.|
|4||Aluminum Slot Rail||Alu-6005-T5||Customized||Cusomized||Designed to fit with our steel frame making it 'Hybrid' steel/Aluminium structure, use the Rail to Cross Pipe Connector for assembly. And easily slide in the modules from top to bottom, Custom Length Available.|
|5||Ground Screw||Galanized Steel||Customized||Customized||Fixed on earthing, contact ground fixed part supply all system|
|6||Clamp Rail||ALu-6005-T5||Customized||Customized||Designed to fit with our steel frame making it 'Hybrid' steel/Aluminium structure, use the Rail to Cross Pipe Connector for assembly. Clamp the modules using Clamps, Custom Length|
|7||Bottom Cap Piece||Galvanized Steel||3×M12||20Kg||Used it connect the Modraxx fame to the base of the fixing, this could be concreat ballast, or various ground scew fixings. Part includes 3 x M12 Hex screws for fixing the steel fram in place.|
|8||Diagonal Braces||Galvanized Steel||M12 Nuts||9Kg||This Piece is used for adding square steel bracing arm between steel pipe framing, this part comes with M10 nuts and bolts for front and rear of the part.|
|9||T-Pipe Connector||Galvanized Steel||7 M 10||15Kg||Designed to connect each of steel frame together, both horizontal and verticale sections, Comes with 7 M10 Hex Nuts for fixing.|
1. Using solar panel plug-in type, do not use any clamp, beautiful appearance, easy to install.
2. Using clamp type, it is a very common use of a structure.
1. Quality Control
All products of Asia aluminum profiles have been through strict verification. Each department has independent self-calibration system, advanced laboratory and testing equipment provided for a full range of reliable physical and chemical analysis and testing on each piece of raw material and product. In the aspect of dynamic control, the quality testing and analysis are dynamically controlled, and be able to provide highly real-time dynamic feedback to find and totally solve the problem and collect related product data.
Asia aluminum is equipped with 44 extrusion production lines. Among them there is 1 set of 6000-ton classextrusion machine which imported from Japan, and 20 sets of 4000-ton, 2750-ton and 2000-ton class extrusion machines imported from UBE. Due to the automatic production line and cooling system imported from Italy (Including double tractor), and adopting (USA) infrared device monitoring outlet temperature, the annual production of extrusion production lines is beyond 400,000 tons.
3. Anodizing Lines
Aisa aluminum possesss five automatic horizontal production lines and one vertical oxidation production line. The oxidable aluminum profile can reach at length of 10 meters and the electrophoresis material is 7.5 meters with an annual production capacity beyond 150,000 tons. As the equipment is high-grade, powerful and advanced, which make Asia aluminum hold International Quality. And owing to the perfect device and optimization of the production line, the properties of the product is more stable, the ideal indicators are better.
For Saving Your Precious Time, We Need To Know These Information First!
1. What are the local wind speed and snow pressure?
2. What is the total power of the project?
How much solar panels are used in this solar energy system?
What’s the size of the solar panel? Length, width and sickness?
Most common size is: 1650×992×35/40/45/50mm
3. For roof mounting:
What kind of roof structure? Tin roof, Tile roof, Flat roof or other roof?
How much roof is the solar system used on?
Each roof’’s size, length and width
4. For ground mounting:
First, we need the soil quality report.
Second, what is the solar system fixed mode? Ground screw, cement block or others.
Third, what is the ground type? Single column, double column, four column and others.
Fourth, what is the maximum distance from the ground?
What is the minimum distance from the ground?
Send us these messages, our professional engineers design projects for you for free.
For more detail information and quotation
please contact us:
Manager: Levi Zhu
Tel/Wechat: +86 15-12-10-58788
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.